A | B | C | D | E | F | G | H | I | J | K | L | M
N | O | P | Q | R | S | T | U | V | W | X | Y | Z
ICEA P-32-382: ICEA Standards Publication for Short Circuit Characteristics of Insulated Cable
ICEA P-45-482: ICEA Standards Publication for Short-Circuit Performance of Metallic Shields and Sheaths of Insulated Cable
ICEA P-53-426: ICEA/NEMA Standards Publication for Ampacities, Including Effect of Shield Losses for Single-Conductor Solid-Dielectric Power Cable 15 kV through 69 kV (NEMA WC 50)
ICEA P-54-440: ICEA/NEMA Standards Publication for Ampacities of Cables in Open-Top Cable Trays (NEMA WC 51)
ICEA P-79-561: ICEA Guide for Selecting Aerial Cable Messengers & Lashing Wires
ICEA P-81-570: ICEA Standards Publication for Direct Burial 600 Volt Cable with Ruggedized Extruded Insulation
ICEA S-19-81: ICEA/NEMA Standards Publication for Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (NEMA WC 3)
ICEA S-56-434: ICEA/ANSI Standards Publication for Polyolefin Insulated Communications Cables for Outdoor Use
ICEA S-61-402: ICEA/NEMA Standards Publication for Thermoplastic-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (NEMA WC 5)
ICEA S-66-524: ICEA/NEMA Standards Publication for Cross-Linked-Thermosetting Polyethylene-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (NEMA WC 7)
ICEA S-67-401: ICEA/NEMA Standards Publication for Steel Armor and Associated Coverings for Impregnated-Paper-Insulated Cables (NEMA WC 2)
ICEA S-68-516: ICEA/NEMA Standards Publication for Ethylene-Propylene-Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy (NEMA WC 8)
ICEA S-70-547: ICEA/ANSI Standards Publication for Weather-Resistant Polyolefin-Covered Wire and Cable
ICEA S-73-532: ICEA/NEMA/ANSI Standards Publication for Control Cables (NEMA WC 57)
ICEA S-75-381: ICEA/NEMA/ANSI Standards Publication for Portable and Power Feeder Cables for Use in Mines and Similar Applications (NEMA WC 58)
ICEA S-76-474: ICEA/ANSI Standards Publication for Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation, 600 Volts
ICEA S-77-528: ICEA/ANSI Standards Publication for Outside Plant Communications Cables, Specifying Metric Wire Sizes
ICEA S-80-576: ICEA/ANSI Standards Publication for Communications Wire and Cable for Wiring of Premises
ICEA S-81-570: Standard for Direct Burial 600 Volt Ruggedized Insulation
ICEA S-82-552: ICEA/NEMA Standards Publication for Instrumentation Cables and Thermocouple Wire (NEMA WC 55)
ICEA S-83-596: ICEA/ANSI Standards Publication for Fiber Optic Premises Distribution Cable
ICEA S-84-608: ICEA/ANSI Standards Publication for Telecommunications Cable, Filled Polyolefin Insulated, Copper Conductor
ICEA S-85-625: ICEA/ANSI Standards Publication for Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable
ICEA S-86-634: ICEA/ANSI Standards Publication for Buried Distribution & Service Wire, Filled Polyolefin Insulated, Copper Conductor
ICEA S-87-640: ICEA/ANSI Standards Publication for Fiber Optic Outside Plant Communication Cable
ICEA-S-93-639: ICEA/NEMA Standard for Shielded Power Cables Rated 5-46 KV for the Distribution of Electrical Energy (NEMA WC 74)
ICEA-S-94-649: Standard for Concentric Neutral Cables Rated 5-46 KV
ICEA S-95-658: ICEA/NEMA Standard for Non-shielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy (NEMA WC 70)
ICEA S-96-659: ICEA/NEMA Standard for Non-shielded Cables Rated 2001-5000 Volts for use in the Distribution of Electrical Energy (NEMA WC 71)
ICEA S-97-682: Standard for Utility Shielded Power Cable Rated 5-46 KV
ICEA S-105-692: Standard for 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cable
ICEA T-22-294: ICEA Standard Test Procedures for Extended Time-Testing of Wire and Cable Insulations for Service in Wet Locations
ICEA T-25-425: ICEA Guide for Establishing Stability of Volume Resistivity for Conducting Polymeric Components of Power Cables
ICEA T-26-465: ICEA/NEMA Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test (NEMA WC 54)
ICEA T-27-581: ICEA/NEMA Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables (NEMA WC 53)
ICEA T-28-562: ICEA Standard Test Method for Measurement of Hot Creep of Polymeric Insulations
ICEA T-29-520: ICEA Standard for Vertical Tray Flame Tests at 210,000 Btu
ICEA T-30-520: ICEA Standard for Vertical Tray Flame Tests at 70,000 Btu
ICEA T-31-610: ICEA Standard for Water Penetration Resistance Test, Sealed Conductor
ICEA T-32-645: ICEA Standards Publication for Compatibility of Sealed Conductor Filer Compounds
IEC 92-3: International Electrotechnical Commission Electrical Installation in Ships - Part 3 Cables (Constructions, Testing, and Installations)
IEEE 45: IEEE Recommended Practice for Electric Installations on Shipboard
IEEE 48: IEEE Standard Test Procedures and Requirements for High-Voltage Alternating Current Cable Terminations
IEEE 100: IEEE Standard Dictionary of Electrical and Electronics Terms
IEEE 141: IEEE Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)
IEEE 142: IEEE Recommended Practice for Grounding of Industrial and Commer
IEEE 241: IEEE Recommended Practice for Electric Power Systems in Commercial Buildings (IEEE Gray Book)
IEEE 242: IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)
IEEE 323: IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE 383: IEEE Standard for Type Test of Class 1E Electric Cables, Field Splices and Connections for Nuclear Power Generating Stations
IEEE 400: IEEE Guide for Making High-Direct-Voltage Tests on PowerCable Systems in the Field
IEEE 404: IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5,000V Through 46,000V, and Cable Joints for Use with Laminated Dielectric Cable Rated 2,500V Through 500,000V (Adopted as a National Standard of Canada, CAN/CSAC22.2 No. 241)
IEEE 446: IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications (IEEE Orange Book)
IEEE 493: IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book)
IEEE 515: IEEE Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications
IEEE 524: IEEE Guide to the Installation of Overhead Transmission Line Conductors
IEEE 525: IEEE Guide for the Design and Installation of Cable Systems in Substations
IEEE 575: IEEE Guide for the Application of Sheath-Bonding Methods for Single-Conductor Cables and the Calculation of Induced Voltages and Currents in Cable Sheaths
IEEE 576: IEEE Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in the Petroleum and Chemical Industry
IEEE 590: IEEE Cable Plowing Guide
IEEE 602: IEEE Recommended Practice for Electric Systems in Health Care Facilities (IEEE White Book)
IEEE 635: IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
IEEE 644: IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
IEEE 738: IEEE Standard for Calculation of Bare Overhead Conductor Temperature and Ampacity Under Steady-State Conditions
IEEE 789: IEEE Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments
IEEE 802.3: IEEE Standard for Information Processing Systems - Local and Metropolitan Area Networks - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications (ISO/IEC) (ANSI/IEEE Std 802.3)
IEEE 802.5: IEEE Standard for Information Technology - Local and Metropolitan Area Networks - Part 5: Token Ring Access Method and Physical Layer Specifications (ISO/IEC) (ANSI/IEEE Std 802.5)
IEEE 816: IEEE Guide for Determining the Smoke Generation of Solid Materials Used for Insulations and Coverings of Electric Wire and Cable
IEEE 844: IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels
IEEE 1017: IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
IEEE 1018: IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
IEEE 1019: IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
IEEE 1120: IEEE Guide to the Factors to Be Considered in the Planning, Design, and Installation of Submarine Power and Communications Cables
IEEE 1202: IEEE Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
IEEE/ICEA S-135: Power Cable Ampacities