Share This Page

HW108: 600V Multiple Traids - TFN PVC/Nylon, PVC, I/S & O/S

Application

For use in instrumentation and process control applications where superior protection from electrostatic interference is required. UL listed as Type TC and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. May be used in NEC Class 1, Division 2 hazardous locations. UL approved for NEC continuous operation at 75°C in wet locations, 90°C in dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Insulation

  • Flame-retardant PVC per UL Standard 62 for Type TFN wire

Insulation Jacket

  • Clear nylon per UL Standard 62 for Type TFN wire

Flame Tests

  • UL 1581 (70,000 BTU/hr) Flame Test

Individual Shield

  • Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

Conductors

  • 7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Overall Shield

  • Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

Jacket

  • Sunlight-resistant PVC per UL Standard 1277. A ripcord is applied longitudinally under the jacket to facilitate stripping

Color Code

  • Triads: black, white and red with printed numbers on one conductor
  • Available upon request: black, red and blue triads with printed number

Additional Standards

  • NEC Type TC for Class I Division 2 areas per Articles 336, 392 and 501, and for Class 1 circuits per NEC Article 725
  • NEC Type NPFL for Non Power Limited Fire Protective Signaling circuits per NEC Article 760
  • UL Type TC-ER Rated for Exposed Run

Browse HW108: 600V Multiple Traids - TFN PVC/Nylon, PVC, I/S & O/S Products

  • Products
  • >
  • HW108: 600V Multiple Traids - TFN PVC/Nylon, PVC,

HW108: 600V Multiple Traids - TFN PVC/Nylon, PVC,

For use in instrumentation and process control applications where superior protection from electrostatic interference is required. UL listed as Type TC and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. May be used in NEC Class 1, Division 2 hazardous locations. UL approved for NEC continuous operation at 75°C in wet locations, 90°C in dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...