HW121: 600V Single or Multiple Triads - XLP, LSZH, I/S & O/S

Live Chat Ask A Question View Spec Sheet

Application

LifeGuard™ Low Smoke Zero Halogen* cable is for use in instrumentation and process control applications where superior protection from electrostatic interference is required. LifeGuard™ jacket is highly flame-retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Product Features

Tray rated
Sunlight-resistant
Approved for direct burial
Tinned conductors provide ease of termination and added protection in caustic environments
Superior electrostatic interference protection from individual and Overall shield
Very low smoke production when burned
LifeGuard™ jacket produces zero halogens during fire – less toxic and corrosive
LifeGuard™ jacket is environmentally safe – lead, sulfur and halogen free
Highly chemical resistant
Very flame retardant
Burns to an ash – does not exhibit thermoplastic drip
Excellent compression and impact resistance
Superior tensile strength and abrasion resistance
Flexible jacket with low coefficient of friction

Conductors

7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation

Cross-linked polyethylene (XLP) per UL Standard 44

Individual Shield

Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire.

Color Code

Triads: black, white and red with printed numbers on one conductor

Overall Shield

Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire.

Jacket

Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277. A ripcord is applied longitudinally under the jacket to facilitate stripping.

Flame Tests

UL Standard 1581 (70,000 BTU/hr) Flame Test
FM Approved — Class 3972 Specification Test Standard — Cable Fire Propagation Group 1

Additional Standards

UL Standard 1685
NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725

Browse HW121: 600V Single or Multiple Triads - XLP, LSZH, I/S & O/S Products