HW152

Live Chat Ask A Question View Spec Sheet

Overview

General purpose 600 volt shielded control cable for use where shielding from electro-static interference is required in power, control and lighting circuits in a broad range of commercial and industrial applications.

Application

Approved for continuous operation at 90°C in dry locations, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts.

Specifications

May be used in NEC Class I and II, Division 2 hazardous locations. Exposed Run (ER) rating available upon request.

Color Code

ICEA Method 1, Table E-2

Jacket

Sunlight-resistant PVC per UL Standard 1277

Insulation Jacket

Clear nylon per UL Standard 62 for Type TFN wire

Insulation

Flame-retardant PVC per UL Standard 62 for Type TFN wire

Conductors

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Overall Shield

Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

Additional Standards

UL Type TC per Article 336 of the NEC
Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC

*TC-ER rating applies to cables with 3 or more insulated conductors

Flame Tests

IEEE 383 (70,000 BTU/hr) Flame Test
ICEA (210,000 BTU/hr) Flame Test

Browse HW152 Products

Products
>
Products
>
HW152: 600V Shielded Control Cable, TFN, PVC/Nylon, (18-16 AWG)

HW152: 600V Shielded Control Cable, TFN, PVC/Nylon, (18-16 AWG)

General purpose cable for use where shielding from electro-static interference is required in power, control and lighting circuits in a broad range of commercial and industrial applications. Approved for continuous operation at 90°C in dry locations, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. Exposed Run (ER) rating available upon request.

Loading products...