Share This Page

HW153

Overview

General purpose 600 volt shielded cable for use where shielding from electro-static interference is required in power, control and lighting circuits in a broad range of commercial and industrial applications.

Application

Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts.

Specifications

May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet and dry locations, 105°C for emergency overload conditions, and 150°C for short circuit conditions.

Color Code

  • Control Sizes: ICEA Method 1, Table E-2

Jacket

  • Sunlight-resistant PVC per UL Standard 1277

Insulation Jacket

  • Clear nylon per UL Standard 83 for Type THHN or THWN wireOVERALL

Conductors

  • Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation

  • Flame-retardant PVC per UL Standard 83 for Type THHN or THWN wire

Overall Shield

  • Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

Flame Tests

  • IEEE 383 (70,000 BTU/hr) Flame Test
  • ICEA (210,000 BTU/hr) Flame Test

Additional Standards

  • UL Type TC per Article 336 of the NEC
  • Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC

*TC-ER rating applies to cables with 3 or more insulated conductors

Browse HW153 Products

  • Products
  • >
  • Products
  • >
  • HW153: 600V Shielded Control Cable, THHN or THWN-2, PVC/Nylon (14-10 AWG)

HW153: 600V Shielded Control Cable, THHN or THWN-2, PVC/Nylon (14-10 AWG)

General purpose cable for use where shielding from electro-static interference is required in power, control and lighting circuits in a broad range of commercial and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...