Share This Page

HW154: 600V Power Cable, THHN or THWN-2, PVC/Nylon

HW154 is a UL Type TC-ER, 600 volt tray cable - power cable with THHN or THWN-2 insulation that is commonly used in primary power and feeder circuits for a broad range of industrial and commercial applications.

THHN (Thermoplastic High Heat-resistant Nylon-coated) wire is one of the most popular types of building wire used in commercial and industrial constuction as it is a cost effective alternative compared to other types of building wire such as XHHW building wire.

HW154: 600V Power Cable, THHN or THWN-2, PVC/Nylon Live Chat Ask A Question View Spec Sheet

Overview

General purpose 600 volt power cable for use in primary power and feeder circuits in a broad range of commercial and industrial applications.

Application

Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts.

Specifications

May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet and dry locations, 105°C for emergency overload conditions, and 150°C for short circuit conditions.

Jacket
  • Sunlight-resistant PVC per UL Standard 1277

Insulation Jacket
  • Clear nylon per UL Standard 83 for Type THHN or THWN wire

Conductors
  • Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation
  • Flame-retardant PVC per UL Standard 83 for Type THHN or THWN wire

Flame Tests
  • IEEE 383 (70,000 BTU/hr) Flame Test
  • ICEA (210,000 BTU/hr) Flame Test

Grounding Conductor
  • Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1277

Color Code
  • 8 AWG and larger: ICEA Method 4
  • AWG – 10 AWG: ICEA Method 1, Table E-2

Additional Standards
  • UL Type TC per Article 336 of the NEC
  • UL Type TC-ER Rated for Exposed Run

Browse HW154: 600V Power Cable, THHN or THWN-2, PVC/Nylon Products

HW154: 600V Power Cable, THHN or THWN-2, PVC/Nylon

General purpose cable for use in primary power and feeder circuits in a broad range of commercial and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...