Share This Page

HW170

Application

LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of commercial and industrial applications. LifeGuard™ jacket is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree ofsafety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Exposed Run (ER) rating available upon request.

Product Features

  • Tray rated
  • Sunlight-resistant
  • Approved for direct burial
  • Tinned conductors provide ease of termination and added protection in caustic environments
  • Very low smoke production when burned

  • LifeGuard™ jacket produces zero halogens during fire – less toxic and corrosive
  • LifeGuard™ jacket is environmentally safe – lead, sulfur and halogen free
  • Highly chemical resistant
  • Very flame retardant

  • Burns to an ash – does not exhibit thermoplastic drip
  • Excellent compression and impact resistance
  • Superior tensile strength and abrasion resistance
  • Flexible jacket with low coefficient of friction

Insulation

  • Cross-linked polyethylene (XLP) per UL Standard 44 for Type XHHW-2 conductors

Conductors

  • Tin coated soft annealed copper per ASTM B-33, Class B stranding per ASTM B-8

Jacket

  • Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277. A ripcord is applied longitudinally under the jacket to facilitate stripping

Flame Tests

  • FM Approved - Class 3972 Specification Test Standard - Cable Fire Propagation Group 1
  • UL Standard 1581 (70,000 BTU/hr) Flame Test
  • IEEE 383 (70,000 BTU/hr) Flame Test
  • ICEA T-29-520 (210,000 BTU/hr) Flame Test
  • IEEE 1202/CSA FT4 (70,000 BTU/hr) Flame Test
  • UL Standard 1685 (70,000 BTU/hr) Flame Propagation and Smoke Release Test
  • Flame Test listings may vary by cable size

Browse HW170 Products

  • Products
  • >
  • HW170: 600V Control Cable, XLP XHHW-2, LSZH

HW170: 600V Control Cable, XLP XHHW-2, LSZH

LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of commercial and industrial applications. LifeGuard™ jacket is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Exposed Run (ER) rating available upon request.

Loading products...

HWC also specializes in hard-to-find specialty items. The HWC team is always concerned with filling customers' orders as properly and efficiently as possible. And if it's not in stock, HWC will get it- no problem! Get A Quote

Ask Us A Question Or Leave Us A Comment

Industries We Serve

With over 30,000 products sold annually, Houston Wire & Cable provides its customers with knowledgeable market and product application experts, standard same-day shipments, 99.99% order accuracy and on-time delivery, and 24/7/365 service.

Choose...