HW310

Live Chat Ask A Question View Spec Sheet

Application:

For use in harsh environments where maximum conductor protection is required. Used for primary power and feeder circuits in a broad range of commercial and industrial power distribution systems. Approved for use in wet or dry locations at 105°C, for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 8000 volts. UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions. Impervious continuously welded and corrugated aluminum armor cable is recommended as an economical alternative to wire in conduit systems.

Conductors

Soft bare annealed copper per ASTM B-3, compact Class B stranding per ASTM B-496, with a semi-conducting conductor shield

Insulation

Ethylene propylene rubber (EPR) per ICEA S-97-682/S-93-639 with a semi-conducting insulation shield

Shield

Uncoated 5 mil copper tape with a minimum of 12.5% overlap

Grounding Conductor

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1072

Armor

Impervious continuously welded and corrugated aluminum

Jacket

Yellow flame-retardant and sunlight-resistant PVC

Flame Tests

ICEA 70,000 BTU/hr and 210,000 BTU/hr Flame Test
IEEE 1202 Flame Test

Color Code

ICEA Method 4

Connectors

Explosion Proof, Class I Division 1: 424MA series – all nickel-plated aluminum
Rain Tight: 416MC series – all nickel-plated brass

Additional Standards

UL listed, NEC Type MV-105 and Type MC, UL Standard 1072
Single conductors are qualified per AEIC CS8.
UL listed Type CWCMC to IEEE 45/IEEE 1580 (46 CFR Part 111.60-23) Marine Shipboard Cable
Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test

Browse HW310 Products

Products
>
Products
>
HW310: 5kV CCW Shielded Cable, Type MC-HL

HW310: 5kV CCW Shielded Cable, Type MC-HL

LifeGuard™ Low Smoke Zero Halogen* cable is for use in power, control and lighting circuits in a broad range of commercial and industrial applications. The impervious armor provides maximum conductor protection and prevents the entrance of water, gas and corrosive elements into the electrical core. The LifeGuard™ jacket is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. It is ideal for applications where a high degree of safety and equipment protection is required.

Loading products...