HW151

Live Chat Ask A Question View Spec Sheet

Overview

General purpose 600 volt control cable for use in power, control and lighting circuits in a broad range of commercial and industrial applications.

Application

Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts.

Specifications

May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet or dry locations, 105°C for emergency overload conditions, and 150°C for short circuit conditions. Exposed Run (ER) rating available upon request.

Color Code

ICEA Method 1, Table E-2

Jacket

Sunlight-resistant PVC per UL Standard 1277

Insulation Jacket

Clear nylon per UL Standard 83 for Type THHN or THWN wire

Conductors

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

Insulation

Flame-retardant PVC per UL Standard 83 for Type THHN or THWN wire

Flame Tests

IEEE 383 (70,000 BTU/hr) Flame Test
ICEA (210,000 BTU/hr) Flame Test

Additional Standards

UL Type TC per Article 336 of the NEC
Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC

*TC-ER rating applies to cables with 3 or more insulated conductors

Browse HW151 Products

Products
>
Products
>
HW151: 600V Control Cable, THHN or THWN-2, PVC/Nylon (14-10 AWG)

HW151: 600V Control Cable, THHN or THWN-2, PVC/Nylon (14-10 AWG)

General purpose cable for use in power, control and lighting circuits in a broad range of commercial and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 90°C in wet or dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Exposed Run (ER) rating available upon request.

Loading products...